Prusa Mini Base version El.pollo.diablo

After completing the Mini Base Upgrade, I noticed the left side of my X-axis was lower than the right. This print is an attempt to both explain and correct that misalignment.While the Mini has the anti-vibration pads placed directly under the Y-axis extrusions, the Mini Base Upgrade moves the pads on the right side all the way out beyond the right edge of the Z-axis. With the full weight of the printer, power adapter, and filament spool resting on such a wide base, this has the potential to cause the printer to sag in the middle. This deflects the Z-axis slightly, causing it to lean to the left, and this in turn causes the X-axis to drop on the left side.After disassembling the original Mini base, I used 3030 extrusions with length 242mm and joined them together to form the starting base.I then made a rectangle of plexiglass to attach to the top of the base, creating a di plane where I put my Prusa Mini.Then I modified the four original legs to attach them at the bottom with 2 M5x12mm