Thingiverse
Prusa MK2 Camera Bed Mount
door PrintCentral
1.4k
Downloads
757
Likes
18
Makes
Raspberry Pi Camera mount and case designed to fit an Original Prusa MK2.
1-M3x10 screw will be needed to replace the stock M3x8 screw that attaches the bed to the frame.
If your Pi is mounted on the top left corner of the frame as most are, you will need a longer camera cable. [Here is a 6ft cable I use from Amazon for $10](https://www.amazon.com/Adafruit-Flex-Cable-Raspberry-Camera/dp/B00XW2NCKS/ref=sr_1_1?ie=UTF8&qid=1470093154&sr=8-1-spons&keywords=raspberry+pi+camera+cable&psc=1)
1-M3x10 screw will be needed to replace the stock M3x8 screw that attaches the bed to the frame.
If your Pi is mounted on the top left corner of the frame as most are, you will need a longer camera cable. [Here is a 6ft cable I use from Amazon for $10](https://www.amazon.com/Adafruit-Flex-Cable-Raspberry-Camera/dp/B00XW2NCKS/ref=sr_1_1?ie=UTF8&qid=1470093154&sr=8-1-spons&keywords=raspberry+pi+camera+cable&psc=1)
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
