Thingiverse
Prusa MK3 Camera Mount
di z_Infinity
1
Download
0
Likes
0
Makes
UPDATED 2/10/2023
Adjusted non-threaded holes diameters for better fit and added shorter arm length.
Logitech C920 webcam mount for Prusa MK3.
Additional Hardware needed:
M5x18mm (or M5x20mm) = 5pcs
1/4-20 x 1in. = 1 pc.
DO NOT OVERTIGHTEN HINGE BOLT
It is best to print the Camera Hinge upright for best strength properties with 100% infill (I printed it flat and it broke pretty quickly).
The Camera Arm can be printed with 15% - 100% infill as desired.
Webcam base should remain attached to webcam no modification needed. Bolts will be snug when threading into printed parts. Bolt hinge into Prusa aluminum extrusion with an X pattern making sure to thread bolts in evenly.
Adjusted non-threaded holes diameters for better fit and added shorter arm length.
Logitech C920 webcam mount for Prusa MK3.
Additional Hardware needed:
M5x18mm (or M5x20mm) = 5pcs
1/4-20 x 1in. = 1 pc.
DO NOT OVERTIGHTEN HINGE BOLT
It is best to print the Camera Hinge upright for best strength properties with 100% infill (I printed it flat and it broke pretty quickly).
The Camera Arm can be printed with 15% - 100% infill as desired.
Webcam base should remain attached to webcam no modification needed. Bolts will be snug when threading into printed parts. Bolt hinge into Prusa aluminum extrusion with an X pattern making sure to thread bolts in evenly.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
