Thingiverse

PrusaSlicer G-code snippets for FlashForge Creator Pro

von DrLex

58 Downloads

36 Likes

0 Makes

**This will no longer be updated.**
[Go to my website](https://www.dr-lex.be/software/ffcp-slic3r-profiles.html) for the latest version and instructions. If you already installed this, you can [go directly to the GitHub repository](https://github.com/DrLex0/FFCP-GCodeSnippets) for the newest files.

*Old description below.*

These are the G-code snippets that belong with [my PrusaSlicer (Slic3r) profiles for the FlashForge Creator Pro](https://www.thingiverse.com/thing:2367215). Although I think the G-code is quite mature now, it is possible I will update it separately from the rest of the profile. Therefore use the *‘Watch’* button to stay notified of updates.
If you want to be on the bleeding edge and get the latest changes even if they are not significant, these G-code snippets are tracked in a [GitHub repository](https://github.com/DrLex0/FFCP-GCodeSnippets).

If you see that only this G-code was updated, you can in most cases copy-paste the updated snippets into the printe

configuration FFCP FFCPRo flashforge gcode PrusaSlicer settings slic3r SLIC3R Settings slicer configuration FFCP FFCPRo flashforge gcode PrusaSlicer settings slic3r SLIC3R Settings slicer configuration FFCP FFCPRo flashforge gcode PrusaSlicer settings slic3r SLIC3R Settings slicer

Quelle

Thingiverse

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Einteilig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker

FDM / FFF

Dateiformat