PS3 Eye Camera support for Anycubic 4Max Pro

This is a support for the PS3 Eye Camera for the Anycubic 4Max Pro but this can serve as an idea to any other printer.

The camera has been removed from the original case and I also removed the microphones to save space. The camera is mounted in the plate support and will move together with the Z-axis.

You need to print the following parts:

1x PCB Mount
1x Hook
2x Middle Arm

Do not print the "PS3 Eye Mount v13.stl" as this is only the 3D model assembled for reference.

Use 0.1mm or 0.2mm, 10% zigzag infill. Make sure you add Brim support, around 10 lines are enough. No need to add support as it has been built in the hook model.

Assemble it using 3x M3x20mm machine screws and nuts. Use the original PS3 Eye PCB screws to attach it to the printed PCB Mount.

The hook needs to be fitted from behind(under) before you mount the last arm. Attach the small hook first in the front and the large hook as the final step. It should "click"

Make sure you adjust the mount so th