PS4 Pro Vertical HDD Mount

Update: So although it fits and hold, you most likely will want to increase the width of the tabs which fit into the slot on the PS4 Pro.
If not add a little blu tack or something to help the print grip the console more.

----


So I used Dotmaster5 mount to wall mount my PS4 Pro, but what about my external HDD?
Get a long cable?
Have it hanging off the cable?

The spacing just fits for a Seagate 4TB Expansion Portable Drive.
I did a rough guess of 20mm.
So if your HDD is thicker or a lot thinner, you will need to alter this in tinkercad or fusion360 for hobbyists.

Print holds with friction fit.
Depending on the weight of you drive you make want to increase the thickness of the tabs which slide onto the PS4 to have a tighter fit, or if you have some foam tape add some to the tabs.
So it'll be up to you to judge, my PS4 is just above a table so if the drive slide off, it wont be damaged. But if you have it halfway up a wall with nothing under it, then you'll want a real