Thingiverse
PSX Retropie
von Anwilc
66
Downloads
59
Likes
0
Makes
For my brother's birthday I wanted to make something special. As the original Playstation is near to his heart I converted an old one to hold a Raspberry Pi, with completely functional controller ports, power & reset buttons, power LED and USB ports in the memory slots.
Several people asked for the 3D models so I've decided to upload them here.
[I made somewhat of a build log with a whole bunch of images.](https://anwilc.com/2019/12/06/PSX_Retropie.html)
The model of the PSX is an SCPH-5552 (european).
**NOTE: Many of these models are based on both parts I already had on hand and others I've bought (some of which I've listed below). This print requires you to modify the PSX case itself quite a bit to make them fit (USB ports, cooling fan and more). This is not a straight & easy build but it might make a good start.**
These were **some** of the parts I've bought for this project from a swedish electronics store, some I already had on hand.
- [USB-A female pcb straight (
Several people asked for the 3D models so I've decided to upload them here.
[I made somewhat of a build log with a whole bunch of images.](https://anwilc.com/2019/12/06/PSX_Retropie.html)
The model of the PSX is an SCPH-5552 (european).
**NOTE: Many of these models are based on both parts I already had on hand and others I've bought (some of which I've listed below). This print requires you to modify the PSX case itself quite a bit to make them fit (USB ports, cooling fan and more). This is not a straight & easy build but it might make a good start.**
These were **some** of the parts I've bought for this project from a swedish electronics store, some I already had on hand.
- [USB-A female pcb straight (
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
