Psychedelic Cat Hueforge 161x235

Print Instructions : Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 160.74x234.99mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.7mm and the Actual Depth is 2.3mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic purple Transmission Distance: 1PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Yellow Transmission Distance: 6PLA BambuLab Basic BambuLab Green Transmission Distance: 2PLA BambuLab Matte Ice Blue Transmission Distance: 3.5PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 7 unique filaments Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to PurpleAt layer #9 (0.8mm) swap to RedAt layer #13 (1.12mm) swap to YellowAt layer #18 (1.52mm) swap to BambuLab GreenAt layer #21 (1.76mm) swap to Ice BlueAt layer #24 (2mm) swap to Jade White for the rest. For only One AMS :1 break is necessary - Put the break at lay