Pteranodon - JP3 - Second Iteration ( Hueforge ) – 3D printable model from MakerWorld

MakerWorld

2D Art

Pteranodon - JP3 - Second Iteration ( Hueforge )

by Sitsero · 2D Art

46 Downloads

11 Likes

5 Makes

Go to Model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 4Swap Instructions: Start with Charcoal Black At layer #10 (0.88mm) swap to Scarlet Red At layer #12 (1.04mm) swap to Lemon Yellow At layer #18 (1.52mm) swap to Jade White for the rest.

pteranodon pterodactyl ptera dino dinosaur jurassic park world 3 hueforge multicolor wall art flying reptile bird

Category

2D Art

Source

MakerWorld

Published

10.12.2023

Updated

30.04.2026

What you need to print this: Beginner Low confidence

Why?

2 colors

Single piece 2 colors / AMS

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Colors

2 (AMS/MMU recommended)

Software

Cura, PrusaSlicer, or similar

Same designer, more platforms

Sitsero also publishes on

1,449 additional models across 2 more platforms

♥ 30,620 ↓ 105,282

♥ 8,516 ↓ 39,026 ⚒ 220

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL