PTFE Coupler Straightener

I had printed something similar from another designer but it only straightened one side, so it really didn't work. As my AMS pushed filament toward the coupler it would bang against it, and back out, or hit it again and you could hear the spring mechanism twang. So I designed this piece from the ground up to hold the whole area straighter. It solved my issues and hopefully works for you. To install, remove the coupler from both the AMS side and the printer side. Slide either side of the coupler onto one side of the PTFE tube, and the other side onto the other. Piece the tubing together into the coupler, and then slide the connector together and screw together to tighten. Then verify the tubing is pushed tightly into the PTFE coupler from both sides. See pics. I printed the coupler straightener using PLA+ on my P1S and it prints in 25min using 4g of filament. ____________Notes: Generally speaking, I can successfully print threads, or other tolerances on my P1S with well-conditioned