PTFE/Filament Cable Guide Plate

INFO NOTE: Some of the newer (late 2023) X1C and P1S printers are coming with rubber and tape over the offending screws and parts that cut the PTFE tube. The model is designed around older machines that don't have this so be wise in your decision to print this. I'm not liable for your printer if you choose to remove factory features. BUILD NOTE: Some people have reported the model does not print all the way vertically. I would be checking you do not have something obstructing the build plate from it's full home position. The model is 245mm long so will use almost the whole build height. DISCLAIMER: I only have one P1Smachine to test on and have allowed some wiggle room for small differences in printers but can't guarantee it will be perfect for every printer. You could use the STEP file to make adjustments if needed, or leave some friendly feedback and I'll tweak what I can! Model Info:This part is designed to allow the cable chain and filament PTFE tube to glide smoothly under the edg