PTFE to Buffer Guide for P1S

I saw a couple of these online already, but none of them were quite as minimalistic as I wanted. I had already printed the replacement buffer to try to fix the filament sticking issue. It worked - mostly. It would still get stuck because there is a lot of slop in the inlet, whether that is the print or my printer, I don't know and don't really care, its amazing. The problem, however, still needed to be fixed. This is a super simple piece of equipment that just holds the PTFE tube snugly in place for a straight line into the buffer. Thats all. I had to use one of the longer screws from the spool holder bag in order to hold it on the right hand side. I made it pretty darn slim, only .020" (.5mm) at the bottom of the holes to hold it, but those screws are very short and apparently, they don't have many biting threads. Plenty of bite with the longer screw. Hope this helps someone other than myself xD