Thingiverse

PuffPipe2

by bbinnard

2 Downloads

3 Likes

0 Makes

This design uses the same basic geometry as https://www.thingiverse.com/thing:5999606, but I increased the size of the pipe parts to make them more visible. This print completed in a little over 12 hours using a print speed of 130 mm/sec and 0.200 layer height.

bowl container vase

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

large print

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Est. print time

12 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for PuffPipe2?

Any FDM printer should handle PuffPipe2 just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

How long does it take to print PuffPipe2?

According to the design notes, PuffPipe2 takes approximately 12 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is PuffPipe2 available in?

PuffPipe2 is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is PuffPipe2 free to download?

Yes, PuffPipe2 is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

PuffPipe2

Similar Models

Add to Collection