Thingiverse
Pumpkin Speaker - Sealed Enclosure
por Pisces_Printing
0
Descargas
0
Likes
0
Makes
This is a 3D scan of a pumpkin that I have modified to fit a Dayton audio speaker, and I've also designed a stand that fits it "Perfectly".
This Printable enclosure utilizes 1-dayton audio PC68-8 full range driver in a downward firing position. I recommend 3-4 walls when printing and at least 20% infill to get a solid sound and not let the internal volume flex.
Fasteners are
4- M4x12mm
2-M5x30mm for the terminals
4- M4 heatset Threads for the speaker
The inset face can be painted after printing or it can be colored very easily in slicers for printing on a bambu AMS or similar - print times will vary accordingly.
Enjoy!
Check out the video on YouTube where I cover the response graph and assembly.
Video: https://youtu.be/om4A9mDdHPw
This Printable enclosure utilizes 1-dayton audio PC68-8 full range driver in a downward firing position. I recommend 3-4 walls when printing and at least 20% infill to get a solid sound and not let the internal volume flex.
Fasteners are
4- M4x12mm
2-M5x30mm for the terminals
4- M4 heatset Threads for the speaker
The inset face can be painted after printing or it can be colored very easily in slicers for printing on a bambu AMS or similar - print times will vary accordingly.
Enjoy!
Check out the video on YouTube where I cover the response graph and assembly.
Video: https://youtu.be/om4A9mDdHPw
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!