Purge Bucket Cup Extended Version

A Remix I did of the original kindly provided by member Turtle3D. I extended the bucket to measure 55mm on the width , from the original 35mm. This allows it to fit perfectly between the left extrusion and bed on a Railcore II 300ZL.
NOTE: You will need the Clip and Mount parts found on the original design here:
https://www.thingiverse.com/thing:3678865

My Wipe Macro:
(you may need to alter the coordinates to fit your purpose)
G1 X0 Y141 F2000 ; Move to purge bucket
G1 E75 F200 ; Extrude 75mm
G1 E-.05 F300 ; Retract
G4 P1000 ; Pause
G1 Y210 F20000 ; Wipe
G1 Y165 F20000
G1 Y210 F20000
G1 Y165 F20000
G1 Y210 F20000
G1 Y165 F20000
G1 Y210 F20000
G1 Y165 F20000
G1 E-.05 F300 ; Retract
G1 Z3 ; lift Z
G1 X150 Y150 F3000 ; Move to center of bed

Link to the PTFE wipe material: (6" x 6" x 1/32" is enough for 12 or more wipers):
https://www.mcmaster.com/ptfe-sheets