Thingiverse

pushrod seal.

by fluidity

11 Downloads

8 Likes

0 Makes

Print slowly in vase mode. set min 10 sec per layer if you don't have a fan.
use something soft but tough like TPU or Ninjaflex filament. 0.2mm layer height, nozzle 0.5 to 0.6 recommended.

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

no supports · large print · 0.20mm layers

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

TPU

Min. bed size

200 mm (Large)

Layer height

0.2 mm

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for pushrod seal.?

Any FDM printer should handle pushrod seal. just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does pushrod seal. need supports when printing?

No supports needed for pushrod seal. — it's designed to print clean off the bed.

What file format is pushrod seal. available in?

pushrod seal. is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is pushrod seal. free to download?

Yes, pushrod seal. is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

2 Suggestions

pushrod seal.

Similar Models

Add to Collection