Thingiverse
PVC 3 " Inline Fan Housing
door Biker_Trash_1340
13
Downloads
20
Likes
0
Makes
PVC 3 " Inline Fan Housing.
Made to fit a 120mm "Muffin" computer type fan with measurements 120 x 120 x 38 mm (common size). Room for wires and has a 10mm hole, so I didn't have to cut the wire connector. Put together with (4) 1/4-20 x 3" bolts and nuts with silicone. It is sized female PVC 3" schedule 40 on both ends.
Using on my home Radon system. It is going outside, so I used PETG and sealed everything with paint and silicone. Went with 4+ walls and 50% infill.
Also see my other post for the PVC 3' vent cap. >> https://www.thingiverse.com/thing:7365073
Made to fit a 120mm "Muffin" computer type fan with measurements 120 x 120 x 38 mm (common size). Room for wires and has a 10mm hole, so I didn't have to cut the wire connector. Put together with (4) 1/4-20 x 3" bolts and nuts with silicone. It is sized female PVC 3" schedule 40 on both ends.
Using on my home Radon system. It is going outside, so I used PETG and sealed everything with paint and silicone. Went with 4+ walls and 50% infill.
Also see my other post for the PVC 3' vent cap. >> https://www.thingiverse.com/thing:7365073
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!