Thingiverse
PyGamer Lanyard Case
von jepler
4
Downloads
1
Likes
0
Makes
I designed this case so that I can wear a [PyGamer](https://www.adafruit.com/https://www.adafruit.com/product/4242) as a badge at an upcoming conference. Don't forget to pair it with [the awesome colorful circuitplayground lanyard](https://www.adafruit.com/product/3987)!
Needs:
* [M2.5x8 socket-cap hex screws](https://www.mcmaster.com/91292A012/) (4) Head diameter 4.5mm
* [M2.5 threaded inserts](https://www.mcmaster.com/94459A130/) (4). Diameter 4.7mm, length 4.3mm
Print with the big flat faces against the print bed. No support.
Partly original work, partly based on the [laser-cut case from Adafruit](https://learn.adafruit.com/adafruit-pygamer/downloads#laser-cut-acrylic-case-3029146-7). Need to change it? FreeCAD design files included!
Needs:
* [M2.5x8 socket-cap hex screws](https://www.mcmaster.com/91292A012/) (4) Head diameter 4.5mm
* [M2.5 threaded inserts](https://www.mcmaster.com/94459A130/) (4). Diameter 4.7mm, length 4.3mm
Print with the big flat faces against the print bed. No support.
Partly original work, partly based on the [laser-cut case from Adafruit](https://learn.adafruit.com/adafruit-pygamer/downloads#laser-cut-acrylic-case-3029146-7). Need to change it? FreeCAD design files included!
jepler veröffentlicht auch auf
24 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
