PYNQ-Z2 Highly Customized Case

The case was designed from scratch according to the PYNQ-Z2 board dimensions. These cases have an 5 mm offset around the PCB to prevent accidental ejection of the SD Card and protect all the others ports.

There are a lot of files in this project which you can choose according to your needs, mainly top and bottom casing files and spacer files. Also a text file is provided so you can print and glue the letters to the top case for a better style.

** As an extra material you will need M2.5 bolts and nuts. The length of the bolts should be less than half of the spacers length. The nuts should be standard nuts (no more than 2 mm in height) **

The files names can be described as:
* Top Files: Top case of the PYNQ-Z2 board.
* Bot Files: Bot case of the PYNQ-Z2 board.
* Spacer Files: Spacers M2.5 that might be needed for the casing.
* Files with "FlatHeadBolt" keyword: The holes for the bolts are suitable for flat head bolts.
* Files with "NoEthernetCavity" keyword: The top part