Thingiverse
QDX_box
di rr72
3
Download
2
Likes
0
Makes
Basic box for QRPLabs QDX transceiver.
The print works best with support enabled, but will work either way.
With support enabled, the board support may need to be cleaned up a bit. Board should slide in cleanly.
The face slips over the connectors and is secured by the top.
The lid is secured with M2.3*5 self tapping screws. The holes in the box and lid will likely need to be drilled out a bit to accommodate the screws.
The print works best with support enabled, but will work either way.
With support enabled, the board support may need to be cleaned up a bit. Board should slide in cleanly.
The face slips over the connectors and is secured by the top.
The lid is secured with M2.3*5 self tapping screws. The holes in the box and lid will likely need to be drilled out a bit to accommodate the screws.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
