Qidi box filament guide

- This is a filament guide to the Qidi box. It guides the filament to the box holes without rubbing the filament to it. it prevents the plastic particles to build up in the holes.

- Prevents the filament to wrapped around the spool when remove.

Print in petg.
support build plate only.

There is two versions:
1., - You will need a ptfe tube, and a Φ3mm diameter plastic fiber optic cable for the led to transmit it to the front. (Qidi_box_filament_guide.stl)
2., - need a ptfe tube, and a transparent filament. (you can print the logo with different color) (qidi_box_guide_filament_version.3mf)
3., - same as 2., but you can put through the ptfe tube. (i didn't try but somebody sad that you can pop out the metal eyelet and put the tube in instead.) (qidi box filament guide ptfe through.3mf)

before install, put a small filament in to the printed part to guide it to the hole precisely.

This is in development. Any advice is appreciated, and must.