QIDI Tech Q1 Pro Modified Platform Leveling Blocks

*Modified* QIDI Tech Q1 Pro Platform Leveling / Calibration BlocksI tried printing the original file that was uploaded on my printer, but not only it needed around two and a half hours to print as well as around 140 grams of filament, It was actually sliced wrong. I tried 3 times, but the infill was horrible! In the end I ended up downloading the original file from Qidi Tech and slicing it myself. Eventually I decided to create my own version of the blocks, because there was simply no need for them to be as big as they were. Print settings and suggestionsNothing too fancy to worry about. The blocks wont experience any high stress forces, so as long as you do not store them inside of the chamber when it's heated they will be good to use for a very long time. Let me give some extra info for those who need it: I run the generic PLA settings on Orca Slicer for the Q1 Pro, with minor changes. Nozzle is 0.4mm and layer height 0.2 mm.PLA is going to work perfectly fine! I would avoid usin