Thingiverse
Qidi-Tech X-Plus Interior Spool Holder
por cnolker
3
Descargas
3
Likes
0
Makes
A spool holder to replace the current inner spool holder. Fits two standard bearings for the spool to rotate on super smoothly.
I used Autodesk Inventor's Degenerative modeling to create the shape from a hollow tube to make it look cool.
Here is the picture of it mounted inside the printer with the bearings:
https://photos.app.goo.gl/AuxXoPKSRjs7Zi1u6
Printing:
Disable coasting to print thin sections better if using PETG which has a better bond strength between layers.
Print with no supports or block supports in the outer wall. The only place it is helpful is along the bearing shaft.
I used Autodesk Inventor's Degenerative modeling to create the shape from a hollow tube to make it look cool.
Here is the picture of it mounted inside the printer with the bearings:
https://photos.app.goo.gl/AuxXoPKSRjs7Zi1u6
Printing:
Disable coasting to print thin sections better if using PETG which has a better bond strength between layers.
Print with no supports or block supports in the outer wall. The only place it is helpful is along the bearing shaft.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
