QIDI Tech X-Plus3 Back Panel MOD Kit

This mod improves exhaust and noise. All components can be printed with X Plus3. No modification of the printer body is required, but the spool case can no longer be fixed to the back of the printer. All materials are PLA; PETG may be preferable for the "core" parts. 0.2mm strength profile of QIDI slicer is used as a base and the bottom solid layer is increased to 5. This may be overkill.The exhaust hose fits 100mm (4inch) diameter. 25mm thick fan is assumed. If using a 12V fan for the PC, a 24V to 12V DCDC converter is required.Back panel will be printed upside down for better appearance.The fan box and upper panel will require additional support at printing.Additional screws and the same number of nuts as below are required. You might want to put washers between them as well.When using an 80mm or 120mm fan:M3x10mm : 7Fan screws (taper screws) :8(for front and back) or M4x40mm : 4If using 40mm fan:M3x10mm : 7M3x15mm : 4 AttentionThere appear to be variations of the X-Plus3 with differ