Thingiverse

QLG1 GPS Case

by dgdimick

1 Downloads

2 Likes

0 Makes

Have a QLG1 GPS for a WSPR radio? Don't know how to remote it away from the radio? Well, now you have a case to at least try and do this.

The "bottom" side has a 15mm (5mm thick) "punch out" if you want to convert the QLG1 to use an external antenna, just punch out the hole, and feed a cable to the SMA connector.

I'm still testing the case, so it may change in the next few weeks, just an FYI.

Print Data -STL's sliced at .16mm 50mm/S with a .4mm Nozzle, walls at 1.2mm, 20% infill.

Top - 32 grams, 10.88 meters of filament, time to print 4:44
Bottom - 32 grams, 10.94 meters of filament, time to print 4:34
Clamp - 1 gram, 0.48 meters of filament, time to print 0:17

Version:
1.1 - Reduced the outsides of the case from 3mm to 2mm
1.0 - First release - have at it.

Amature Radio clock GPS Ham Radio QLG1 Qrp QRP labs QRSS radio Ultimate3 wspr Amature Radio clock GPS Ham Radio QLG1 Qrp QRP labs QRSS radio Ultimate3 wspr

Source

Thingiverse

What you need to print this: Beginner Low confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format