Slicer Discord
3DSEARCH / qtip holder
qtip holder – 3D printable model from Thingiverse Thingiverse

qtip holder

by va5
0 Downloads
0 Likes
0 Makes
Go to Model
This is a simple 3d print

This takes about 18 hours total and uses about 149 grams. You can change it if you want :0.
Make sure to print with supports. YOU CAN SCALE IT DOWN IN YOUR SLICER


Printer brand:
Creality

Printer:
Ender 3v2

Rafts:
optional

Supports:
yes

Resolution:
0.1

Infill:
20
Source
Thingiverse
What you need to print this: Intermediate Medium confidence
Why?
supports needed
Single piece Supports required
Supports 2/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
Est. print time
18 h
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Does qtip holder need supports when printing?
Yes, qtip holder will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.
How long does it take to print qtip holder?
According to the design notes, qtip holder takes approximately 18 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is qtip holder available in?
qtip holder is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.
Is qtip holder free to download?
Yes, qtip holder is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection