Quadrocopter Kenny-6

Hi,
This is Racing Quadrocopter frame in size about 200mm for 5" props. Aim was to create compact light but rigid 3Dprinted frame. I'm using standard 250 class gear:

Motors: 2204 2300kv (Multistar) - hole distance 19mm
ESC: 20A (Littlebee)
Prop: any 5" (Kingkong 5045 3-blade)
Batery: 1400mAh 4S (Multistar)
FC: standart mounting holes 30,5 x 30,5 (Sparky F3)
FPV Cam.: Eachine 700TVL 1/3 CMOS
FPV VT: Eachine 25mW Raceband
PDB: something smaller - Matek Micro PDB With 5V 12V
RC: your choice

Flyght Weight with RunCam 2 is 530g

To build this frame you will need:
Bolts:
M3x6: 8pcs
M3x10: 4pcs
M3x16: 6pcs
M3x20: 7pcs
M3x25: 4pcs

M3 Nuts: 15pcs
Nylon:
Bolt M3x16: 4pcs (but you can use steel)
M3 Nut: 8