Quest 3 left arm/plug replacement

Fasteners:
4x M3 Nuts
2x 30 mm M3 Bolts
2x 10 mm M3 Bolts

This replaces both the left arm and the "plug" that holds the USB-C port, and is made specifically to work with the BOBOVR M2/M3 head strap. Replacing this part requires complete disassembly of the headset. Use the following video as a guide:
[https://www.youtube.com/watch?v=pFw5o86_Mhc](https://www.youtube.com/watch?v=pFw5o86_Mhc)

Be very careful when unclipping the rubber face cover, the plastic frame attached to it is thin and fragile.Don't bother disassembling the lenses or cameras, just get the headset stripped down to the frame so that you have easy access to the opposite side of the mounting hole.

This design assumes that you still have the o-rings from the original plug, as well as the USB port. The USB should screw into the upper plug portion, then the other half gets held on by the o-rings. This whole assembly gets pushed through the hole in the frame, then the arm goes on and holds them in place with 2 30