Thingiverse

Quick and easy mobile stand

by copper_guy

9 Downloads

3 Likes

0 Makes

Good angle for video call.

No supports.
100% infill.....1 hour 19 minutes.

Max. wide for phone+case 12mm.

Adjustable!
if you want holder to be shorter than 45mm, just stop print whenever you like. Same layers.

Good old Blackberry is perfect also for posing :) for sale if needed :D

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

1 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Quick and easy mobile stand need supports when printing?

No supports needed for Quick and easy mobile stand — it's designed to print clean off the bed.

How long does it take to print Quick and easy mobile stand?

According to the design notes, Quick and easy mobile stand takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Quick and easy mobile stand available in?

Quick and easy mobile stand is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Quick and easy mobile stand free to download?

Yes, Quick and easy mobile stand is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Quick and easy mobile stand

Similar Models

Add to Collection