Quick and Easy Wall Mountable Hooks – 3D printable model from MakerWorld

MakerWorld

Other House Models

Quick and Easy Wall Mountable Hooks

by prchlikblaine · Other House Models

8 Downloads

3 Likes

2 Makes

Go to Model

Print Parameters50%+ Favorite Infill (no lightning infill)5 walls0.28mm layer height Material Use and Print Time32g PLA+ filament used2h 25m print time (5 walls, 50% cubic subdivision on Ender 3 Pro at 50mm/s)I printed in Inland PLA+ and had good strength but PETG would probably be the best material for this. Wall MountingHole is 6mm in diameterBase in 5mm in thickness so account for that in screw selection Use CasesSmall hooks should be plenty strong for even the biggest wad of keysBig hooks should be fine for a small bag or purses (especially in PLA+ or PETG)

wall hook household easy quickprint quick helpful wallmounted useful easyprint hooks walls wallmountable hookmount wallsmount

Category

Other House Models

Source

MakerWorld

Published

12.12.2023

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

0.28mm layers

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

PLA, PETG

Min. bed size

50 mm (Small)

Layer height

0.28 mm

Est. print time

2 h

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Quick and Easy Wall Mountable Hooks?

Any FDM printer should handle Quick and Easy Wall Mountable Hooks just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

How long does it take to print Quick and Easy Wall Mountable Hooks?

According to the design notes, Quick and Easy Wall Mountable Hooks takes approximately 2 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Quick and Easy Wall Mountable Hooks available in?

Quick and Easy Wall Mountable Hooks is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Quick and Easy Wall Mountable Hooks free to download?

Yes, Quick and Easy Wall Mountable Hooks is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL