Quick Disconnect Clamp for Desk Table Workbench

IMPORTANT: This will require some effort on the FIRST FEW twist ins and twist outs of the thicker bolt into the C clamp. If you can't do it yourself, as a friend, loved one, coworker, or some random do-gooder to help--its worth it. Don't be discouraged though..it really does work!!! I purposefully left tolerances a little tighter so that the lever would stay in place when removing (don't you hate when you have a setting dialed in and it disappears?…so do I) MATERIALS NEEDED:Superglue or plastic glue (for the pin cap)…that it. PRINT SETTINGS:Layer Height: 0.2Infill 15-20% (I've added a modifier for the C clamp arm to be 40% Gyroid for strength)The one shown in the pictures is PLA, but you can print this in ABS too (just make sure you have your settings dialed-in)Keep XY hole compensation on (this works with it turned off too… just a tad harder to prime the bolt the first go-around)Parts are placed in print-ready orientation. Change them around at your own risk.Z distance