Thingiverse
Quick-Swap Brushless Motor Mount
door toader
1
Downloads
1
Likes
0
Makes
This design makes swapping and mounting brushless motors quicker and easier.
I printed it in PLA using a 0.2mm layer height. The tolerances are fairly forgiving, so it should print well on most 3D printers.
You'll need to make a locking pin using metal wire with a diameter between 2.3mm and 3.3mm. Make sure to bend the pin as shown in the reference image—this creates a cam action when rotated, tightening the two parts together and eliminating any movement.
Here is a video of it. https://youtu.be/iqCApi7Uga8
I printed it in PLA using a 0.2mm layer height. The tolerances are fairly forgiving, so it should print well on most 3D printers.
You'll need to make a locking pin using metal wire with a diameter between 2.3mm and 3.3mm. Make sure to bend the pin as shown in the reference image—this creates a cam action when rotated, tightening the two parts together and eliminating any movement.
Here is a video of it. https://youtu.be/iqCApi7Uga8
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
