Slicer Discord
Quinn SAE 1/2" Impact Socket Holder Gridfinity – 3D printable model from MakerWorld MakerWorld
Organizers

Quinn SAE 1/2" Impact Socket Holder Gridfinity

79 Downloads
35 Likes
32 Makes
Go to Model
Gridfinity socket organizer for Harbor Freight Quinn SAE Standard-height Impact sockets 1/2" drive, set 70087. Please note that to accommodate some of the smaller sockets tapering at the top and some of the larger sockets tapering at the base, the front row is inserted base down and the back row is inserted top down (upside down). I wanted to keep the height consistent with my other designs so I had to make that compromise to keep things from falling out when you slam the drawer. Model is 2U (W) x 6U (L) x 3U (H). File is AMS ready. I print all of my garage organizers in PETG for durability, but PLA would probably do the job. Need Metric? See my matching Metric Holder. My design specifications:All holders are 3U deep for a uniform look.Must pass a drawer SLAM test. (I use my tools, not just look at them.)Left to right layout with smaller sockets in the front.Clear label for the entire set in the upper left corner.0.8mm hole clearance around all sockets for easy insert/removal.1.5mm
Category
Organizers
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Why?
2 colors
Single piece 2 colors / AMS
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA, PETG
Colors
2 (AMS/MMU recommended)
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection