R2D2 spool drawer organizer

From the archives of the internet, I bring you the R2 spool drawer organizer — colorful and designed for Bambu spools. There are several files available, with and without color, for those who prefer to multicolor print instead of painting it.You will need to print the following:PLATE 1 ×2PLATE 2 ×2PLATE 3 ×2PLATE 4 and 5 — print 6 total (blank, with tag holder, or combined)PLATES 5, 6, 7, 8, 9, 10, 11, 12 — print once eachPLATE 13 ×2 (for 3-level organizer)PLATE 14 ×1BASIC STEPS FOR ASSEMBLYInstall the wheels on the base using a small piece of 1.75 mm filament. Add a small amount of glue to the filament after assembly.Screw the base and the small pole together to attach the bottom with the wheels.Screw in the two spool extenders.SPOOLS AND DRAWERSThis design is optimized for Bambu spools.Use the template to mark with a sharpie and then drill 3 mm holes on both sides of each spool. Factory holes can be used — just align them with the template. (3 spools are needed.)IMPORTANT: Make sure