r53 Clutch Slave Compression tool

Use abs, 3-4 walls, 20-35% infill, print with the screw holes up, use supports for the wings. There is chamfering to allow for an easy fit of the slave. I've tested with basic bambu pla and it hasnt exploded yet.

Simple compression tool for r53 mini cooper clutch.

used m8 x 1.25 80mm hex screws (120mm if you can find them).

Not as good as littletitus's design which mimics the OEM tool -----> https://www.thingiverse.com/thing:4788829, however i was able to scrounge up hardware for this design.