Race Drone Frame (Fully 3D Printable)

This is a fully 3D printable 5 inch drone frame. It weights 94 grams when printed in PETG, competing with similarly sized carbon frames. Admittedly not as durable, but much more replaceable. (Though it can be printed in much stronger materials than just PETG) It accepts a 20 x 20mm stack under 16mm in height. The top plate is attached to the main body using four of each of the following: 6mm M2 bolt, 8mm M3 bolt, M2 insert nut, M3 insert nut. An additional two 8mm M2 bolts were used to mount the camera. I will include the original .F3D file so that anyone can modify to fit their own components if need be as well as links to all the components used.

Motors: https://www.aliexpress.com/item/2255800454382863.html?spm=a2g0o.order_list.0.0.728e1802WaAkKs&gatewayAdapt=4itemAdapt

Propellers: (any 5 inch prop with an inner diameter of 5mm will do)

Flight Controller ESC combo stack: https://www.aliexpress.com/item/3256802567200099.html?spm=a2g0o.cart.0.0.627438daiyrOAr&mp=1 (currently