Thingiverse
Racedash 7inch Raspberry Pi touchscreen
di finkn
6
Download
6
Likes
0
Makes
This is an enclosure for a 7inch Raspberry Pi Screen with a mounting-bracket for a waveshare Raspberry Pi 4 Compute Board. Located in the rear of the enclosure are 4 Molex 24Pin Header holes, to provide all your power, in and output needs.
You will need the following parts.
-All 3 provided 3d printed parts
-6 threaded heat Set M3 nuts
-6 ~15mm M3 screws
-Waveshare Compute board
-7inch Raspberry Pi screen
If you intend to use this in a car, use ABS/ASA or similar to avoid warping, the inside of a car in the sun will get hot, >60°C.
You will need the following parts.
-All 3 provided 3d printed parts
-6 threaded heat Set M3 nuts
-6 ~15mm M3 screws
-Waveshare Compute board
-7inch Raspberry Pi screen
If you intend to use this in a car, use ABS/ASA or similar to avoid warping, the inside of a car in the sun will get hot, >60°C.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
