Radds LCD case & mount

A two part enclosure designed to attach to alloy extrusion and hold a Radds LCD screen with a swivel / tilt mount .Compact thickness (only 20mm thick) by using 4 x 3mm through holes in PCB as case screw fixings, one 2 screw mount for 40x40 alloy extrusion and one for 20x20 alloy extrusion.Two versions of case halves, one held together with 4x 3mm cap head bolts 20mm long and trapped nuts - the other screws together with self tapping screws 4 x 3mm diameter 13mm long into a blind hole(drill out 2.5mm) . PCB locates onto 4 x 2.5mm pins in lower half of case. 2 x ribbon cables pass between mount legs. Knob has a D shaped mount hole and a 2mm hole (to be tapped M3 ) for a 3mm grub screw,2 x buttons designed to "float ". A slot for SD card. Built on UP+ at 0.2mm resolution, with supports on outside of case. As is usual with any home built models, some degree of finnishing / filing and drilling may be required to comlplete the model.