Radiomaster Boxer Stand - Updated

This is is a remix of a stand on here that works (thanks for the design!), but that has some important upgrades. The brackets are beefed up (the originals broke on me in a couple hours) and the angle is more layed back, which I like and is more in line with the aluminum stands for other radios. It also now has stoppers on the top so when it is at full deflection, it is locked at that position and has a much more definitive stopping point. Overall, it is very solid, and feels that way when using.

I printed in PETG with 100% infill.

The brackets get installed with the hole that is closer to the edge on top. You use the screws from the fabric handle to install the brackets. The pivot screw holes are not perfectly round. In my experience, this allows for a little bit of relief and can keep breakage down if it is tight.

You use M3x16 screws for the pivot pins to mount the stand. M3x14 will work, but 16 are the perfect size.