Radxa Zero 3w OpenIPC RubyFPV VRX / Groundstation

**updated - SD card is now accessible from the rear**

This is a case that holds a Radxa zero 3w and two BL-M8812EU2 wireless radios, intended for use with OpenIPC/RubyFPV on a set of goggles.
Please disregard the antennas used, I'm waiting on some patches to come in the mail.

****I accidentally fried my VTX before I was able to fly with this so I do not know how well it handles heat, so print at your own risk. If it's too toasty I will add more ventilation****

Be aware that tolerances are very tight for this and you man need to use a deburring tool or an exacto knife to slightly open up certain areas depending on your printer/filament.

Filament - Siraya Tech Fibreheart PET-CF
Printer - Bambu P1S
.16 layer height, 3 walls, 3 top/bottom

This was drawn from scratch, but was heavily influenced by the VRX posted by Romushock @ https://www.thingiverse.com/thing:6917528. My components did not fit that case so here we are.

This design also offers power via either the Barrel jack or a