Thingiverse

Räsvelg Canopy

di falconmultirotors

54 Download

40 Likes

1 Makes

The canopy from the Räsvelg 3" and 5" race quads. This canopy has a built-in 7mm spacer and is designed to bolt to a 2-layer 30.5mm stack, and is designed specifically to hold HS1177-style cameras without mounting hardware.

#### Supported FPV cameras:

* HS1177 / Foxeer XAT600M
* RunCam Swift V1

This canopy does not fit the Foxeer Arrow, RunCam Swift 2, or RunCam Eagle as they lack the nubs requires to snap into the canopy.

Installing the camera by drilling screws through the side of the canopy will compromise the ability of the canopy to absorb impact and will likely result in broken canopies and cameras. Do it at your own risk.

#### Supported lenses

The canopy is designed for 14mm outer diameter lenses, with camera nub holes for 1.8mm and 2.8mm focal length lenses. Some 2.5mm lenses may fit, but only if they have an outer diameter of 14mm.

#### Required hardware

Depending on the thickness of the frame, you'll need some fairly long M3 screws. The 3.5mm Räsvel

Fonte

Thingiverse

Cosa serve per stampare: Intermedio Bassa affidabilità

Pezzo unico Viteria richiesta

Supporti 1/3

Assemblaggio 0/3

Impostazioni 1/3

Dimensioni piano 0/3

Post-lavorazione 1/3

Stampante

FDM / FFF

Formato file