Rainbow Spinner Wand

NO AMS REQUIRED! There is one plate for each color. I've also included a plate that has ALL the objects so you can print them all at one time. For my single color print I used Ziro Matte PLA Tri-Color Purple Sunset For my multiple color print I used only Bambu basic PLA colors. The only “fancy” color is Bambu Arctic Whisper for the stem and spacers (those could be done in white - noted on the plate's label). If you like this model, check out my others: https://makerworld.com/collections/10569526 A couple of assembly tips: Good bed adhesion is important for this print. I recommend using a smooth PEI plate or effects plate. The stem can warp if there is a draft or poor bed adhesion. This will cause them to not spin properly. Depending on the filament you use, and how accurate your printer is, you might need to use a de-burring tool or sand paper to slightly shave down the stem where the rainbow and spacers are placed. The arcs should spin with minimal effort. If the spacers are a bit snu