RAK5010 "Outdoor" enclosure

This is a smaller enclosure alternative for the WisTrio RAK5010 cellular tracker and sensor module.   It can be used outdoors, but it does not have any IPxx protection. An overlap of the lid and the bottom provides some protection against water splash.  The enclosure is large enough to hold the RAK5010 and a 3200 mAh battery (64 x 44 x 10 mm). It has a provision to connect an external antenna with RP-SMA or SMA connector and a space to fix the GNSS antenna.  Additional required parts: 6 pcs of ⌀ 2 mm x 6 mm self tapping screws 2 pcs of wall screws, max ⌀ 6 mm (for wall mount variant) 4 pcs of ⌀ 20 mm x 2 mm magnets (for magnet mount variant)  The enclosure base is available in 3 variants: with a hanger provision for wall mount for mounting with magnets   If using the variant for magnet mount, the enclosure is prepared to hold 4 pcs of ⌀ 20 mm x 2 mm magnets. This variant requires support which has to be removed before the magnets can be mounted. After all support is removed the bottom should look like this: Then the magnets can be glued in. The openings are kept tight, so it will require some force to push them into place.