Rally Car

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 163.19x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 2.6mm and the Actual Depth is 2.5mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Jessie Premium Purple Ice Transmission Distance: 18 PLA BambuLab Basic Red Transmission Distance: 4 PLA Kexcelled Sky Blue Transmission Distance: 2.6 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Purple Ice At layer #12 (1.04mm) swap to Red At layer #18 (1.52mm) swap to Sky Blue At layer #20 (1.68mm) swap to Orange At layer #24 (2mm) swap to Yellow for the rest. Boost MeI hope you like the print if you do please consider a boost. It's for free and it would help me a lot. Thank you and enjoy the print