Ram Hanuman

Project: Ram Hanuman.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 100x177.72mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2mm and the Actual Thickness is 1.84mmFilaments Used: #000000 PLA+ wol3d Black Transmission Distance: 0.5 #f9220c PLA+ wol3d Red Transmission Distance: 4 #dfda08 PLA+ wol3d Yellow Transmission Distance: 8 #ffffff PLA+ Wol3d White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #9 (0.8mm) swap to Yellow At layer #18 (1.52mm) swap to White for the rest.