Thingiverse
Raspberry & SSD enclosure
par gobo38
178
Téléchargements
99
Likes
2
Makes
I was really screwed up with the performance of SD Card in Raspberry PI and
because it is possible to boot a Raspberry 3B or 3B+ from USB (https://www.raspberrypi.org/documentation/hardware/raspberrypi/bootmodes/msd.md)
i made a casing to hold the Raspberry and a SSD.
My 3D-printserver now runs on a Raspberry Pi 3B and an 120G SSD. It works perfect.
As base i used https://www.thingiverse.com/thing:1015706 (many thanks for this perfect design)
because it is possible to boot a Raspberry 3B or 3B+ from USB (https://www.raspberrypi.org/documentation/hardware/raspberrypi/bootmodes/msd.md)
i made a casing to hold the Raspberry and a SSD.
My 3D-printserver now runs on a Raspberry Pi 3B and an 120G SSD. It works perfect.
As base i used https://www.thingiverse.com/thing:1015706 (many thanks for this perfect design)
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
