Raspberry Pi 2 and 3 enclosure

Raspberry Pi case compatible with Versions 2 and 3.

GPIO is not realy accessible with this design, more oriented for a mediacenter use.

You will need 8x M3 brass inserts like the ones on the picture, and of course screws (4x M3L6 & 4x M3L10) ; one in each 4mm hole.

The 4 holes of the Rpi have to be slightly enlarged with a 3mm drill bit. Bon't worry about it, it won't break anything and it is really easy to do, even by hand.

It is possible to print the top of the case with two colors. To proceed, with Slic3r, right click on the part, and select "Split" and "To parts". Thus, you will view the two bodies of the STL file and will be able to set different options, like the extruder number...
You can also choose to remove the ornament body to create an imprint. As you like.

The feet can be printed in flexible filament, but the assembly is so lightweight that printing it in any material won't make a really big adhesion difference.

The hole on the top is here to place a LE