Raspberry Pi 2/B+ case for Lulzbot Mini(Angle Adjusted)

This is an angle adjusted version of Raspberry Pi 2/B+ case for Lulzbot Mini by arijaycomet. This adjustment allows the case to mount level to the frame of the printer. I've included 0110-M-P's original top stl file here for convenience, though the bottom piece is the only one that has changed. See 0110-M-P's original case for the source stp files.

The following hardware was used to assemble the case:

2x - Sheet metal screw, phillips pan head, #4 x 1/4"
https://www.boltdepot.com/Sheet_metal_screws_Phillips_pan_head_Stainless_steel_18-8_4.aspx?Selected=5435

3x - Sheet metal screw, phillips pan head, #4 x 3/4"
https://www.boltdepot.com/Sheet_metal_screws_Phillips_pan_head_Stainless_steel_18-8_4.aspx?Selected=2298

The following hardware was used to mount the case to the printer:

2x - 18-8 Stainless Steel Button-Head Socket Cap Screw
M3 Size, 8 mm Length, .5 mm Pitch
http://www.mcmaster.com/?error_redirect=true#92095a181/=10n1k9r
WARNING, do not except 10mm in screw len