Thingiverse
Raspberry Pi 2 Exoskeleton
por boverby
39
Descargas
26
Likes
0
Makes
Inspired by http://www.thingiverse.com/thing:374377 by SOUNDSK
His design was modified to fit the Raspberry Pi model 2/3 and provide
more mounting options.
Assembly can use 4x #2 screws or 4x M3x10 cap head screws to hold
the two halves together. Lots of other pass holes ( some with hex nut
recesses ) to allow more bracketry or mounting. The pc board is
"pinched" between the upper and lower components.
The assembly and the two halves supplied in Designspark format (.rsdoc).
This will allow you to modify any hole sizes or wall thicknesses
to work better on your printer.
RaspberryPi2 model derived from step file included in :
https://grabcad.com/library/raspberry-pi-2-model-b-3d-cad-assembly-model-2
created by Robèrt Akòpov
His design was modified to fit the Raspberry Pi model 2/3 and provide
more mounting options.
Assembly can use 4x #2 screws or 4x M3x10 cap head screws to hold
the two halves together. Lots of other pass holes ( some with hex nut
recesses ) to allow more bracketry or mounting. The pc board is
"pinched" between the upper and lower components.
The assembly and the two halves supplied in Designspark format (.rsdoc).
This will allow you to modify any hole sizes or wall thicknesses
to work better on your printer.
RaspberryPi2 model derived from step file included in :
https://grabcad.com/library/raspberry-pi-2-model-b-3d-cad-assembly-model-2
created by Robèrt Akòpov
boverby también publica en
7 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!