Raspberry Pi 2020 Extrusion Mount Kit

This is a simple Raspberry Pi mount designed to go on 2020 aluminum extrusion. There are four parts- a baseplate for attaching the Pi to the 2020, a spacer you can adjust for offset in case you have a panel or something you need to clear the baseplate above (the spacer goes between the baseplate and 2020 as needed). There's also a cover designed to mount on top of a Pi and a PoE hat. Finally, there's a bracket to keep wires from putting tension on the Pi if they are pulled. Parts are all printed in PETG without supports, 30% infill, although infill could probably be lower. Editable parts are on Tinkercad here: https://www.tinkercad.com/things/afPu3NooFqf/edit

Parts list is below:

Raspberry Pi 4: https://www.amazon.com/CanaKit-Raspberry-Basic-Kit-2GB/dp/B07TYK4RL8/ref=as_li_ss_tl?crid=MBSOG0WWFXTY&keywords=raspberry+pi+4&qid=1568223165&s=gateway&sprefix=rasp,aps,284&sr=8-6&linkCode=sl1&tag=86753090e-20&linkId=d7eafab9f78cf8bdaead732b7b87c07d&language=en_US
Raspberry Pi PoE H